Dive Rite TransPac XT Package w/ REC EXP Wing

Features
Harness
One of Dive Rite’s signature products, the Transpac XT leads the way in comfort and durability. Developed by Dive Rite CEO, Lamar Hires, the Transpac XT design was born from expeditions in the remote karst region of Japan. These expeditions required a harness that was rugged and comfortable, both in and out of the water. The Transpac XT uses a true mountaineer backpack design with integrated hip pads, molded foam lumbar support pad, and ergonomic shoulder pads. The Transpac XT is available in sizes XS-XXL, and is also available in sizes specifically for women.

The Transpac XT balances weight across the hips and back, evenly distributing the weight of single or double tanks. The integrated wrap-around hip pads, made of dual density foam, snugly hug the lower back giving critical support and cushioning. Double-foam shoulder pads fit perfectly beneath the two-inch shoulder webbing to give chafe-free comfort. The molded foam lumbar pad is contoured in all the right places with mesh airflow channels for instant draining topside. Chest-support strap provides ideal
load distribution and when used with the removable 1.5-inch crotch strap, provides stability and comfort in the water. Transition plates at the shoulders allow for quick user addition/removal of hardware and finite adjustments. Sizes XS-Med will include one 2” marine-grade stainless steel D-ring on each shoulder, sizes LG-XXL will include two 2” marine-grade stainless steel D-rings on each shoulder. All sizes come standard with one 2” marine-grade stainless steel D-ring on each side of the waist webbing. Dual 2” cam straps with marine-grade stainless steel buckles are positioned to give plenty of head room for easy maneuvering in the water.

The Transpac XT is neutrally buoyant, weighs less than 5lbs (2.29kg), and packs flat for travel.

• Soft backplate constructed of 1000 denier ballistic nylon for maximum tear and abrasion resistance
• Marine grade stainless sideplates provide custom fit and performance depending on placement at waist
• Shoulder straps feature pivot rings at chest level for load distribution and acetyl resin quick release buckles for easy doff and don. Four 2-inch D-rings on each shoulder strap on sizes L-XXL. Sizes XS-M have one 2-inch D-ring per shoulder strap due to space limitations.
• Two-inch (50 mm) nylon webbing rated at 7,000 pounds breaking strength forms the shoulder and waist straps.
• Dual, 36-inch cam straps with lightweight marine stainless buckles
• Grommet mounting holes slide over bolt kit when diving doubles. Stability plates should also be used when diving doubles to protect harness and provide maximum security.
• Weight XS:4 lbs 4 oz (1.92kg), Sm:4 lbs 4 oz (1.95kg), Med:4 lbs 8 oz (2.054kg), Lg:4 lbs 12 oz (2.15kg), XL:4 lbs 14 oz (2.20kg), XXL:4.93lb (2.23kg),
• Made in the U.S.A.

Wing
A hybrid wing, the Rec Series can be worn on single or double tanks making it one of our most popular wings. When diving single tanks, our Gusset Control System streamlines the wing, keeping it close to the body. This avoids the “taco” effect of the wing wrapping around the tank, away from the diver, which diminishes buoyancy control. Available in single or dual bladder, the Rec Series has 45lbs/20.4 kg of lift and can accommodate two 85ft3/12 L back mounted cylinders.

Durable 1680 ballistic nylon EXP material or our even more rugged SuperFabric® brand technology XT material that creates an armor-clad outer shell that is impervious to damaging pinches and cuts, with a 1680 ballistic nylon divers side panel.Rec EXP (Model BC 4300) are further enhanced with a heavy-duty, 210 denier nylon laminated bladder.

As a part of our modular BCD system, it can be matched with either a TransPac® XT, Transplate or any metal backplate and webbing harness.

• Model BC4300 Rec EXP has an outer bag made of 1680 denier ballistic nylon that resists tears and abrasion.
• Inner bladder is constructed from heavy-duty 210 denier nylon laminated bladder which is highly resistant to pinches and punctures
• Urethane flanges are welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools.
• Comes equipped with choice of 16-inch rapid exhaust (pull dump), 16-inch or 12-inch elbow along with either 15-inch, 22-inch or 27-inch low pressure inflation hose.
• Two sets of two marine-grade 316 stainless steel grommet mounting holes are used to attach wing to harness and/or to double tanks and set diver trim.
• Approximate dimensions uninflated: 24-in H x 23-in W (60.9cm x 58.4cm)
• 3.12 lbs (1.41kg)

Option Weight pockets (add on)
The 16 lb Quick Buckle (QB) Weight Pockets consist of an insert pocket that easily releases when the handle is pulled and a holster that stays securely on the waist belt. Designed for use on the TransPac harness, they can be worn vertically or horizontally with each pocket holding up to 8 lbs of weight securely in position throughout the dive. Simple, top-loading pocket protects divers from an inadvertent buoyancy event by keeping weight securely in place. Worn at an angle on the waist belt for easier access, the right hand pocket is identified by the Dive Rite logo while the left pocket is plain, without a logo. Tall and narrow.

• Holds up to 8 lbs (3.6 kg) in each pocket. Right hand pocket has the Dive Rite logo patch. The left hand pocket is plain, without a logo.
• 1680 denier ballistic nylon fabric is tear and abrasion resistant.
• Two-inch (50.8 mm) nylon webbing loops on the back of the pocket slide over a 2-inch webbing waist strap and secure the pocket into place.
• Acetyl quick buckle is used to easily secure the pocket in the holster.
• Nickel plated brass grommets resist rust and corrosion.
• 9-in high x 3.5-in wide x 1.5-in deep (22.9 cm x 8.9 cm x 3.8 cm)
• 12 oz (340.2 g)
• Made in the U.S.A.

OR
The 32lb Quick Buckle (QB) Weight Pockets consist of an insert pocket that easily releases when the handle is pulled and a holster that stays securely on the waist belt. The insert pocket has two compartments to separate heavy weights and keep them from slipping inside. Designed to be worn with the TransPac harness, the 32lb QB Weight Pocket is worn vertically with each pocket holding up to 16 lbs. of weight securely in position throughout the dive. Simple, top-loading pocket protects divers from an inadvertent buoyancy event by keeping weight securely in place. Worn at an angle on the waist belt for easier access, the right hand pocket is identified by the Dive Rite logo while the left hand pocket is plain, without a logo.

• Holds up to 16 lbs (7.25 kg) in each pocket. Right hand pocket has the Dive Rite logo patch. The left hand pocket is plain, without a logo.
• 1680 denier ballistic nylon fabric is tear and abrasion resistant.
• Two-inch (50 mm) nylon webbing loops on the back of the pocket slide over a 2-inch webbing waist strap and secure the pocket into place.
• Acetyl quick buckle is used to easily open and close the pocket.
• Nickel plated brass grommets resist rust and corrosion.
• 5-in high x 6-in wide x 1.5-in deep (21.6 cm x 15.3 cm x 3.8 cm)
• 1.3 lb (0.51kg)
• Made in the U.S.A.

Transpac siz chart and measuring guide. Download PDF