The lithium-ion cartridge for OTTOVAC, and the upgrade from the AA compartment.Two single-cell 18500 li-ion cells give consistent output over a much longer runtime, and the whole cartridge recharge...
The AA battery compartment for OTTOVAC, with a green on and off switch built into the cartridge.It takes four standard AA cells, and that is the point: if you are working somewhere remote and the l...
The same GRABO PRO, packed in a hard case instead of a canvas bag. If your suction gripper lives in a truck bed, a trailer or a site container, this is the version to buy.
The hardshell case prote...
Hanging upper cabinets alone is normally a two-person job done badly by one. The GRABO Cabinet Installation Plates, designed by Izzy Swan, fix that by putting the weight on a pair of GRABO grippers...
The GRABO PRO is the workhorse of the range: a portable electric vacuum lifter with a 20 liters per minute pump, a significant step up from the original Nemo GRABO.
More flow means a faster grab a...
The GRABO RockSeal™ is built for the surfaces that defeat everything else. This patented seal grips extremely textured, uneven and hard material with a surface profile of up to 10mm, where a standa...
OTTOVAC cups get smart. The OTTOVAC DIGITAL is the next generation of powered suction tool, built for pros who want modern feedback in a familiar form.It looks and handles like a traditional suctio...
The official charger for every GRABO HighFlow battery. It takes the 20V (18V EU) 5.2Ah packs on a 100-240V input with a 21V 4A output, so it works anywhere in the world with the right lead.Compact,...
The GRABO ATTACHMENT PLATE locks into the four metal anchor points on your tool and adds a mounting surface with multiple threaded ports. Lights, cameras, phones, laser levels, microphones and more...
More surface area, more hold. The Foam Seal 400 pairs with the GRABO Suction Plate 400 to take your HIGH FLOW vacuum lifter from 150 lbs (68 kg) up to 242 lbs (110 kg) of rated capacity.At 400mm (1...
The GRABO U-HOIST is a rigid steel bar that takes up to four GRABO tools and turns them into a single crane or forklift attachment for very large material.When one suction gripper is not enough, th...
The 400mm (16in x 16in) SMART CUT seal for the GRABO HIGH FLOW Suction Plate 400, and the answer to big, rough, thirsty pavers.Precision cutting gives the foam channels that hold a seal against dee...
Keep both hands on the job and leave the GRABO HIGH FLOW to hold the load. The 850mm wired remote connects to the control port on the tool and switches the suction gripper on and off from the end o...
Everything you need to take your GRABO HIGH FLOW into large-format work, in one bundle.The Suction Plate 300 clips onto the tool and the 12in x 12in Foam Seal 300 locks into the plate with four spr...
This is the standard foam seal that ships in the GRABO HIGH FLOW kit, sold separately as a replacement.It is a 12in x 12in uncut pad that clips onto the 300mm suction plate in seconds, and it is th...
The GRABO 90 Degree Seam Setter brings two pieces together at a true right angle and holds them there while you set the joint. It works on porous and non-porous surfaces alike, which is what separa...
A spare battery is what keeps a vacuum gripper working through the afternoon instead of sitting on the tailgate. This 14.8V lithium-ion pack is the official replacement for the Nemo GRABO and the G...
Suction is only as good as the air path behind it. These replacement filters fit the Nemo GRABO and the GRABO PRO, and swapping a dust-packed element for a clean one brings a tired suction gripper ...
Control your GRABO HIGH FLOW from up to 30 meters away.The wireless receiver plugs into the control port on the tool and the keyfob handles ON and OFF from a distance, so you never need a hand on t...
The SMART CUT 300mm (12in x 12in) foam seal for the GRABO HIGH FLOW Suction Plate 300, precision cut for the worst surfaces on site.The cut pattern is what separates it from the standard pad. On ex...
The all-in-one 300mm kit for the GRABO HIGH FLOW, built for the rough stuff.You get the 300mm (12in x 12in) Suction Plate paired with the SMART CUT Foam Seal 300. The plate clips to the tool with f...
Run your GRABO HIGH FLOW without keeping a hand on the tool. This 1500mm wired remote plugs into the control port on the gripper and puts ON and OFF at the end of a cable, so the vacuum lifter can ...
The GRABO Canvas Bag is the heavy-duty replacement for the bag your tool shipped in. Double zipper closures and multiple compartments keep the suction gripper, its battery, charger, spare seals and...
Drilling into concrete or stone usually means fighting the drill. The GRABO BORE MOUNT removes that fight: a heavy-duty plate that takes two GRABO tools on the outside and a core drill or drill pre...
The official 20V (18V EU) 5.2Ah pack for the GRABO HIGH FLOW, the biggest battery in the range because the HIGH FLOW is the hungriest vacuum gripper in it.Moving 1.5 cubic meters of air per minute ...
Stop lifting and start rolling. The GRABO ROLLER attaches to your tool with three quick-lock pins and puts two large rubberized wheels on the far end, so heavy material travels on the ground instea...
One suction gripper, six points of contact. The GRABO PANEL PRO is a modular large-format rail system that multiplies a single tool into up to six 8-inch suction cups, spreading the hold across a w...
The official 20V (18V EU) 2.6Ah pack for the GRABO PRO BRUSHLESS, the same battery that ships with the tool.Consistent output, compact size, and enough capacity to keep the suction gripper cycling ...
The GRABO TILE VIBRATION attachment locks onto the anchor points on your tool and adds two power vibration settings, so you can settle tile and flooring into thinset or mortar without a mallet and ...
The VAC PLATE + VAC PUC Workholding Kit, developed by Izzy Swan of Swan Tool Group, takes your GRABO out of lifting entirely and turns it into a shop clamping system. It works with all GRABO tool m...
The Grabo Pro Brushless Foam Rubber Seal Type A1 is the secret behind GRABO's versatility, designed to grip heavily textured materials with ease . This patented, high-friction, closed-cell rubber s...
The GRABO V2 retains the power and compatibility of the original NEMO GRABO while introducing a PRO-style ergonomic handle, enhanced controls, LED battery indicators, and fully sealed buttons for i...
