Secure your backplate to a set of doubles, a rebreather, or a single tank adapter with ease using EZ Nutz. Precision-machined from passivated 304 stainless steel, they feature five scalloped edges ...
1/2 Inch Tapered Thread Pro Valve
* Standard yoke outlet w/spin-out adapter converts to 230 bar DIN outlet * Clean for pre-blended Nitrox up to 40% FO2 * Hex wrench tighten dip tube *...
Manifold - Dr 200 BarFits 3/4" tanks, comes with burst disks rated for 3500 psi.
Dive Rite's 200 bar manifold uses two barrel o-rings to seal either end
of the cross-bar, which provides better s...
The OMS Delrin Thumbwheels are designed as an option instead of the traditional metal wing nuts. Delrin material is very durable and long lasting in a salt water environment and will not rust or co...
If you plan to use Nitrox (up to EAN40) or if you need to switch between yoke and DIN regulators, then the Thermo PRO valve is the valve for you. It is pre-cleaned and ready for any adventure.
St...
2 pieces 3/8-16 x 5” hex head cap screws fully threaded 18-8 SS
2 pieces 3/8-16 wing nuts 18-8 SS
2 pieces 3/8-16 finish nuts 18-8 SS
2 pieces 3/8 medium split washer 18-8 SS
2 pieces 3/8...
XS Scuba Tank Muffler
Drain it quiet
Drain it slow
Drain it safe
Attach to DIN or Yoke Style valves
Exhaust holes on opposite side of XS Scuba logo
All brass construction
If you plan to use Nitrox (up to EAN40) or if you need to switch between yoke and DIN regulators, then the Thermo PRO valve is the valve for you. It is pre-cleaned and ready for any adventure.
St...
XS Scuba PRO
Standard yoke outlet with spin-out DIN insert converts to 230 bar DIN outlet
3/4”-14 NPSM standard inlet threads
Clean for pre-blended Nitrox up to 40% oxygen
1.5 handwheel ro...
BK800
2 pieces 5/16-18 x 5.5” hex head cap screws fully threaded 18-8 SS
2 pieces 5/16-18 wing nuts 18-8 SS
2 pieces 5/16-18 finish nuts 18-8 SS
2 pieces 5/16 medium split washer 18-8 SS
...
Set up for 3500 psi service for use on older “thin-necked” Pressed Steel 3500 psi cylinders
7/8”-14 UNF inlet threads
Dedicated 300 bar DIN outlet
Attachment of DIN first stages only
Air ...
Thermo Standard Crossbar with Isolator
Connects right & left modular valves together to build a Thermo Isolation Manifold
Center-to-center distance: 215 mm (8.46 in)
Double barrel O-ring...
XS Scuba FKM O-Ring - Outlet VP15-V supports the following items:
PRO Valve Reserve “J” Valve Modular PRO Valve - Right Hand Thermo PRO Valve Thermo One Piece Manifold Therm...
This manifold is mainly for use with older HP steel cylinders, like those made by Pressed Steel, Norris and others
7/8”-14 UNF standard inlet threads
Dedicated 300 bar DIN outlets
8.46 inch (215mm...
Thermo Deluxe K
Quality, dependability and reputation have made this valve the most popular, widely-used valve for scuba cylinders in the world. The Thermo K valve is used by more dealers, resorts...
8.00" Cylinder Bands with Stainless Steel Hardware Kit
8.00" Cylinder Bands with Stainless Steel Hardware Kit
Precision manufactured to the exact specifications of Joe McGrath’s original Highland ...
Thermo Modular PRO
Standard yoke outlet with spin-out DIN insert converts to 230 bar DIN outlet
Modular access plug included
3/4”-14 NPSM standard inlet threads
Clean for pre-blended Nitro...
Thermo Modular PRO
Standard yoke outlet with spin-out DIN insert converts to 230 bar DIN outlet
Modular access plug included
3/4”-14 NPSM standard inlet threads
Clean for pre-blended Nitro...
XS Scuba PRO
Standard yoke outlet with spin-out DIN insert converts to 230 bar DIN outlet
3/4”-14 NPSM standard inlet threads
Clean for pre-blended Nitrox up to 40% oxygen
1.5 handwheel ro...
Set up for 4350 psi service for use on composite “thin-necked” cylinders
7/8”-14 UNF inlet threads
Dedicated 300 bar DIN outlet
Attachment of DIN first stages only
Air service only
