“V” Weight Pouch• Add trim weight in the center groove of your backplate• Attach with twin cylinder band bolts• 11” center to center• Stainless steel grommets• Two mesh compartments; front and back...
2" 90 Degree Billy Ring
Add an extra D ring to your weight belt.
Great place to clip things that you just don't know what to do with.
Also can be used on BCD's. Stands out straight never folds ov...
2 pieces 3/8-16 x 5” hex head cap screws fully threaded 18-8 SS
2 pieces 3/8-16 wing nuts 18-8 SS
2 pieces 3/8-16 finish nuts 18-8 SS
2 pieces 3/8 medium split washer 18-8 SS
2 pieces 3/8...
BK800
2 pieces 5/16-18 x 5.5” hex head cap screws fully threaded 18-8 SS
2 pieces 5/16-18 wing nuts 18-8 SS
2 pieces 5/16-18 finish nuts 18-8 SS
2 pieces 5/16 medium split washer 18-8 SS
...
Mini Tech Gauge Adapter, attaches any pony bottle gauge to a standard 7/16" High Pressure Hose!
Mini Tech Gauge Adapter to High Pressure Hose
Highland Millworks Fine Quality!
Fits on standard...
Highland Bungee Mount Compass - HL306 Complete: compass module, bungee mount & bungee cord 30 inch length of 4 mm bungee cord Mount with one continuous loop ortwo separate loops for redundancy ...
Compact, low profile first stage
Specifically designed for drysuit inflation
Flow-by piston design
One high pressure, two low pressure ports
Factory set I.P. at 115 to 125 psi on 3000 psi
Direct a...
Delrin 2nd Stage Plug Set AC914
2nd Stage Plug Set
Protect the ends of your second stage and hose when the second stage is disconnected from the hose
Includes both male and female ...
Highland Deluxe Inline Shut-Off HL404-DLX
Deluxe Inline Shut-Off
Install between standard regulator hose and second stage
Red colored visual indicator of closed position
Green colo...
Rebuildable & Adjustable OPV Over Pressure Valve
All stainless steel construction
Easy to adjust from 150 to 250 psi
Factory preset at 175 to 185 psi
Machined Delrin cap protects the adjustmen...
Prevents catastrophic gas loss during transport of cylinders, saving your time and money!
Stainless Steel DIN Plug
Precision machined from 316 stainless steel
Protects DIN valve threads
...
Highland Tail Weight Pouch• Designed for adjusting your trim when using double cylinders• Attach with lower cylinder band bolt• Two stainless steel grommets for attachment• Sealed opening with doub...
Thin-Line SPG
Compact and thin, high-quality pressure gauge
Nickel-plated brass housing
Durable, Lexan lens
Ready to mount directly to high pressure hose
Airspool included with Vito...
Easy Mounting of the Pony Cylinder
Mount on the diver’s right or left side
Mount upright or upside-down
Secure and stable attachment
Easy attachment with stainless steel cam buckle
No hos...
420 Grade stainless steel construction
Rust resistant titanium coating
Cut your way out of most anything
304 Grade stainless steel hinge bolt
Red handles
The gauge will thread directly into a regulator’s first stage HP portWith the included adapter, it will thread onto the end of a HP hoseKit includes gauge with rubber boot, in-line adapter and airs...
The economical way to protect your DIN valve threads and keep contaminants outIncludes a safety relief plug in case gas is accidentally turned on while plug is installedComes with cord attached
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
